DOUBLE TWIST BUNCHING MACHINE

It is a type of machine with low vibrations and noise that offers a control system on length and wire breaking detection at different points of the line, with the possibility of self-adjusting the set shot.

Main Features:
Payoff section:

• Easy string-up due to the ergonomic position;
• Possibility to adjust the number ot wire requested;
• High-performance pre-cabling device to guarantee the right shape of the cord before it enters the twist section;
• Self-adjustment of the wire tension.

Bunching section:

• Special software to easily control the strand parameter;
• Special capstan design to obtain the same and correct tension in any moment of strand process;
• Accurate system to check the wire brake;
• Easy operations to change the strand pitch and the control of the over twister device;
• All the catenary path is on rotating pulleys;
• Double check of cord length to achieve a tolerance 0.2%.

General advance:

• Minimum level of maintenance;
• Integrate load and unload spool system;
• Simple and friendly operative system;
• Ergonomic position of the control panel;
• Top range of continuously speed production;
• Low noise due to a soundproof cover.

General features:

• The machine can operate with bright wire, brass wire or zinc-plated wire;
• The machine's principle is the double twist stranding;
• This machine is basically designed for Steel Cord but it can operate and process other steel wires as well;
• Due to a gears system, the machine guarantees optimal and constant production parameters with low tolerances.