What makes Eurolls stand out in general, and particularly in this field, is the concept of maximum flexibility and versatility. Eurolls has extended the use of cold rolling cassettes into sectors such as compaction of high carbon and stainless steel strand. By using the basic cassettes technology, Eurolls has been able to produce special version to meet the most varied market demands with regards to the production of special profiles.
Therefore, cassettes with only two, three, and four rolls or 4+4 rolls have been produced. Custom made, four rolls driven cassette coupled with idle cassette and suitable for producing ribbed squares up to 25mm is part of the "special cassette" such as the rotating cassette to produce spiral wire.
Cassette for making imprints on the high-carbon wire; simply structured with two rolls working synchronously to be able to make symmetrical imprints on the wire.
Cassette for performing high-carbon cable compacting, structured on the basis of its smaller sister cassettes CB and CA. It differs in the size of large pins and rolls to withstand large loads and large inlet diameters
Cassette for performing square and triangular section wires; it consists of 4 synchronized rolls positioned at 90° from each other, which can process square section wire up to the width of 10 mm. The rolls can also be adjusted independently to be able to facilitate obtaining rectangles.
Simultaneous backhoe adjustment cassette; this cassette combines the structure of the CA and CB construction cassettes and the compactness of the C1 cassette. The result is a compact cassette for producing ribbed wires as small as 1.5 mm by avoiding independent adjustment of each roll
Rotating box for twisted wire, consists of 4 rolls placed on a rotating spindle driven by a motor capable of executing twisted square section wires according to regulations.